RUN NAME       MRSCAL TEST DATA.
TASK NAME      TASK 1 OF 2: TORGERSON DATA P.286 
# OF STIMULI   9
INPUT FORMAT   (10F5.2)
DIMENSION       2
PRINT           ALL
PLOT                ALL
PUNCH          ALL
PARAMETERS     DATA TYPE(1)  LINEAR TRANSFORM(1) CRITERION(.00000001)
COMMENT         RED HUE MUNSELL COLOURS, DIFFERING IN 
                BRIGHTNESS & SATURATION,
                DATA DERIVED FROM 82 TRIADS WITH 38 SUBJECTS, 
                SEE TORGERSON PP280 ET SEQ     
COMMENT
               PARAMETER DEFINITIONS
               ---------------------
       
                1) DATA TYPE (DEFAULT VALUE : 0)
                   0 : THE DATA ARE SIMILARITIES.
                   1 : THE DATA ARE DISSIMILARITIES.
                2) LINEAR TRANSFORM (DEFAULT VALUE : 0)
                   0 : NO LINEAR TRANSFORMATION OF DATA IS REQUIRED.
                   1 : LINEAR TRANSFORMED IS REQUIRED.
                     (SEE PROGRAM WRITE UP)
                3) LOG TRANSFORM (DEFAULT VALUE : 0)
                   0 : NO LOG TRANSFORMATION OF DATA IS REQUIRED.
                   1 : LOG TRANSFORMATION OF DATA IS REQUIRED.
                4) MATFORM (DEFAULT VALUE : 0)
                     (ONLY RELEVANT WHEN 'READ CONFIG' IS USED.)
                   0 : THE INPUT CONFIGURATION IS PUNCHED STIMULI (ROWS)
                       BY DIMENSIONS (COLUMNS).
                   1 : THE INPUT CONFIGURATION IS PUNCHED DIMENSIONS
                       (ROWS) BY STIMULI (COLUMNS).
                5) CRITERION (DEFAULT VALUE : 0.00001)
                   THE CRITERION VALUE FOR TERMINATING ITERATIONS.
                6) MINKOWSKI METRIC (DEFAULT VALUE : 2.0)
                   THE MINKOWSKI METRIC FOR THE ANALYSIS.         
ITERATIONS     50
READ MATRIX
-2.37
-0.12-1.01
-0.62-1.93 0.70
 0.23-0.90-1.32-0.78
 1.56 0.80-0.67 1.25-1.02
 1.09-0.47 1.07-1.75-1.23 0.57
 2.02 1.05 0.70 0.28-1.65-0.67-1.18
 2.23 0.78 2.62-0.72 0.49 1.88-1.30 0.42
COMPUTE
TASK NAME      MORSE CODES DATA (COOMBS,THEORY OF DATA P.481)
# OF STIMULI     10
INPUT FORMAT      (5X,10F3.2)
DIMENSION       2
PARAMETERS      LINEAR TRANSFORM(1) LOG TRANSFORM(1)
PLOT              POINT(3)SHEP(2) STRESS(3,2) FINAL CONFIG(2)
READ MATRIX
..--- 62
...-- 16 59
....- 06 23 38
..... 12 08 27 56
-.... 12 14 33 34 30
--... 20 25 17 24 18 65
---.. 37 25 16 13 10 22 65
----. 57 28 09 07 05 08 31 58
----- 52 18 09 07 05 18 15 39 79
INPUT FORMAT    (3F4.0)
PRINT DATA      YES
READ CONFIG
1.0 2.0 3.0 
2.5 3.8 5.1
1.5 3.2 4.9
9.9 6.5 4.4
3.4 5.6 7.8 
1.  2.0 4.4
3.5 6.5 7.5
3.6 5.6 7.8
3.5 6.7 8.1
3.1 5.1 3.4
COMPUTE
FINISH
